Placing technical symbols - Revision history

Julien at 15:47, 5 August 2024

2024-08-05T15:47:24Z

← Older revision		Revision as of 17:47, 5 August 2024
Line 3:		Line 3:
	<td width="80%">		<td width="80%">
	<!-- contenu -->		<!-- contenu -->
	<h1 class="title_page">~~Understanding the Place window~~</h1>		<h1 class="title_page">Placing technical symbols</h1>
	To provide someone with a full placement folder, whether it's for the placer, the client, ... the water arrivals, the power outlets, the output wires and the other technical constraints must be in the correct places on the designs and the elevations.		To provide someone with a full placement folder, whether it's for the placer, the client, ... the water arrivals, the power outlets, the output wires and the other technical constraints must be in the correct places on the designs and the elevations.
	These particular objects are can all be found in the '''@TECHNICAL SYMBOLS''' catalogue.		These particular objects are can all be found in the '''@TECHNICAL SYMBOLS''' catalogue.

Julien at 15:45, 5 August 2024

2024-08-05T15:45:44Z

← Older revision		Revision as of 17:45, 5 August 2024
Line 1:		Line 1:
	<table width="100%">		<table width="100%">

	<tr>		<tr>
	<td width="80%">		<td width="80%">
	<!-- contenu -->		<!-- contenu -->
			<h1 class="title_page">Understanding the Place window</h1>
	To provide someone with a full placement folder, whether it's for the placer, the client, ... the water arrivals, the power outlets, the output wires and the other technical constraints must be in the correct places on the designs and the elevations.		To provide someone with a full placement folder, whether it's for the placer, the client, ... the water arrivals, the power outlets, the output wires and the other technical constraints must be in the correct places on the designs and the elevations.
	These particular objects are can all be found in the '''@TECHNICAL SYMBOLS''' catalogue.		These particular objects are can all be found in the '''@TECHNICAL SYMBOLS''' catalogue.

Julien at 15:26, 5 July 2023

2023-07-05T15:26:12Z

← Older revision		Revision as of 17:26, 5 July 2023
Line 50:		Line 50:
	</table>		</table>

	<span class="btnretour">[[#top\|Back top of page]]</span>  <span class="btnhome">[[~~Poser du texte~~, ~~des flèches~~, ~~des symboles~~\|Next step]]</span>		<span class="btnretour">[[#top\|Back top of page]]</span>  <span class="btnhome">[[Placing text, arrows, symbols\|Next step]]</span>

Julien at 15:25, 5 July 2023

2023-07-05T15:25:53Z

← Older revision		Revision as of 17:25, 5 July 2023
Line 50:		Line 50:
	</table>		</table>

	<span class="btnretour">[[#top\|~~Retour haut de~~ page]]</span>  <span class="btnhome">[[Poser du texte, des flèches, des symboles\|~~Etape suivante~~]]</span>		<span class="btnretour">[[#top\|Back top of page]]</span>  <span class="btnhome">[[Poser du texte, des flèches, des symboles\|Next step]]</span>

Julien at 15:24, 5 July 2023

2023-07-05T15:24:01Z

← Older revision		Revision as of 17:24, 5 July 2023
Line 35:		Line 35:
	<div align="center">		<div align="center">
	<p class="cadreimg">		<p class="cadreimg">
	[[Image:~~Symbole2_FR~~.png\|link=]]		[[Image:Symbole2_EN.png\|link=]]
	</p></div>		</p></div>

Julien at 15:16, 5 July 2023

2023-07-05T15:16:43Z

← Older revision		Revision as of 17:16, 5 July 2023
Line 26:		Line 26:
	<div align="center">		<div align="center">
	<p class="cadreimg">		<p class="cadreimg">
	[[Image:~~Symbole1_FR~~.gif\|link=]]		[[Image:Symbole1_EN.gif\|link=]]
	</p></div>		</p></div>

Julien at 12:14, 19 April 2023

2023-04-19T12:14:22Z

← Older revision		Revision as of 14:14, 19 April 2023
Line 1:		Line 1:
	~~<div id="top"></div>~~
	<table width="100%">		<table width="100%">

	<tr>		<tr>
	<td width="80%~~" valign="top~~">		<td width="80%">
	<!-- contenu -->		<!-- contenu -->
			To provide someone with a full placement folder, whether it's for the placer, the client, ... the water arrivals, the power outlets, the output wires and the other technical constraints must be in the correct places on the designs and the elevations.
			These particular objects are can all be found in the '''@TECHNICAL SYMBOLS''' catalogue.

	~~<div align="center">~~		Place yourself in the wireframe elevation perspective to place a power outlet that will be displayed via its technical symbol. To do this:
	~~<p class="cadreimg">~~
	~~[[Image:PoseTexteFlèche1_FR.gif\|link=]]~~
	~~</p></div>~~

	~~''<big>Placing text</big>'''~~

	~~In order to display information about your scene, you have the option of placing text in InSitu.~~

	~~To do so, go to '''~~Place ~~\| Text'''~~

	~~A window will appear, where you can fill~~ in ~~your text and change~~ the ~~font or colour.~~

	~~The text~~ will ~~appear in the centre of your scene. You can then move it like any other object on InSitu~~.

			1. Choose the catalogue named '''@TECHNICAL SYMBOLS'''.

	~~''<big>Placing an arrow</big>'''~~		2. Choose the block named Outlet 10A in the list of blocks area

	~~Placing an arrow can help you highlight a space so that you can put~~ text ~~outside~~ of the ~~shape itself~~.		3. Enter the distance in the "L" text box to specify the distance between the centre of the outlet and the left end of the wall.

	~~Placing an arrow is done via '''Place \| Arrow'''~~		If you know the distance between the technical symbol and the right end of the wall, you should fill in this information in the "R" text box.

	~~The first mouse click indicates the beginning of the arrow and the second indicates the end.~~

			4. Note that the value of 400 represents the default outlet placement height and that you can change it for your preferred value.

			5. Confirm by clicking on the "Place" button or by pressing on ENTER.

	~~''<big>Placing an elevation~~ symbol~~</big>'''~~		If you are not trying to place it very precisely, then you can use the "drag and drop" technique to place your technical symbol.

	<div align="center">		<div align="center">
	<p class="~~cadrevideo~~">		<p class="cadreimg">
	~~<youtube width="500" height="300">~~		[[Image:Symbole1_FR.gif\|link=]]
	~~https~~:~~//www~~.~~youtube.com/watch?v=6ssUBh0dxVE&list=PL7MrU2icgiqG_kzDeXbQh76CJrA8C5coM&index~~=3
	~~</youtube>~~
	~~<br>Voir le tutoriel vidéo~~
	</p></div>		</p></div>

	~~The elevation symbol is used to see and work on 2D elements from the front. There are three ways to see an element from the front :~~

	~~1 - Selecting an object (clicking on the inner edge), then going to '''View \| Realistic or wireframe perspective'''~~

	~~2 - Selecting a wall (clicking on the inner edge), then going to '''View \| Wireframe or realistic elevation'''. By double clicking on walls, you will immediately be put into the realistic perspective.~~

	~~3 - Placing an elevation symbol, which will allow you to elevate an object or a group of objects, and then via '''View \| Wireframe or realistic view'''.~~

	~~In order~~ to ~~place this elevation~~ symbol, ~~you must~~ click on the ~~'''Place''' button~~ and ~~then '''Elevation~~ symbol'~~'' in~~ the ~~ensuing drop down menu~~. ~~It takes three clicks~~ to ~~place~~ it~~: the two first~~ to ~~define the elevation area and the third one~~ to ~~determine~~ the ~~depth~~.		<p class="encadrer">If you want them to stand out more, then you can change the color of the technical symbol reminder lines
			To do so, select a technical symbol and right click on it, the click on attributes and modify the colour. To change all the technical symbol reminder lines, don't forget to select "Paste style" on "All". This window also allows you to modify the placement height. Once again, don't forget to select "Paste height" on "All" if you want it to be applied to all the symbols.</p>

	<div align="center">		<div align="center">
	<p class="cadreimg">		<p class="cadreimg">
	[[Image:~~SymboleEval1_FR~~.png\|link=]]		[[Image:Symbole2_FR.png\|link=]]
	</p></div>		</p></div>

	~~If you place an object in this view, it will be placed between the first two clicks in the depth.~~



	<!-- fin contenu -->		<!-- fin contenu -->
Line 72:		Line 50:
	</table>		</table>

	<span class="btnretour">[[#top\|Retour haut de page]]</span>  <span class="btnhome">[[~~Sauvegarder et imprimer l'implantation~~\|Etape suivante]]</span>		<span class="btnretour">[[#top\|Retour haut de page]]</span>  <span class="btnhome">[[Poser du texte, des flèches, des symboles\|Etape suivante]]</span>

Julien at 12:13, 19 April 2023

2023-04-19T12:13:57Z

← Older revision		Revision as of 14:13, 19 April 2023
Line 1:		Line 1:
			<div id="top"></div>
	<table width="100%">		<table width="100%">

	<tr>		<tr>
	<td width="80%">		<td width="80%" valign="top">
	<!-- contenu -->		<!-- contenu -->
	To provide someone with a full placement folder, whether it's for the placer, the client, ... the water arrivals, the power outlets, the output wires and the other technical constraints must be in the correct places on the designs and the elevations.
	~~These particular objects are can all be found in the '''@TECHNICAL SYMBOLS''' catalogue.~~

	Place ~~yourself~~ in the ~~wireframe elevation perspective to place a power outlet that~~ will ~~be displayed via its technical symbol~~. ~~To do this:~~		<div align="center">
			<p class="cadreimg">
			[[Image:PoseTexteFlèche1_FR.gif\|link=]]
			</p></div>

			''<big>Placing text</big>'''

			In order to display information about your scene, you have the option of placing text in InSitu.

			To do so, go to '''Place \| Text'''

			A window will appear, where you can fill in your text and change the font or colour.

			The text will appear in the centre of your scene. You can then move it like any other object on InSitu.

	~~1. Choose the catalogue named '''@TECHNICAL SYMBOLS'''.~~

	~~2. Choose the block named Outlet 10A in the list of blocks area~~		''<big>Placing an arrow</big>'''

	~~3. Enter the distance in the "L"~~ text ~~box to specify the distance between the centre of the outlet and the left end~~ of the ~~wall~~.		Placing an arrow can help you highlight a space so that you can put text outside of the shape itself.

	~~If you know the distance between the technical symbol and the right end of the wall, you should fill in this information in the "R" text box.~~		Placing an arrow is done via '''Place \| Arrow'''

			The first mouse click indicates the beginning of the arrow and the second indicates the end.

	~~4. Note that the value of 400 represents the default outlet placement height and that you can change it for your preferred value.~~

	~~5. Confirm by clicking on the "Place" button or by pressing on ENTER.~~

	~~If you are not trying to place it very precisely, then you can use the "drag and drop" technique to place your technical~~ symbol.		''<big>Placing an elevation symbol</big>'''

	<div align="center">		<div align="center">
	<p class="~~cadreimg~~">		<p class="cadrevideo">
	~~[[Image~~:~~Symbole1_FR~~.~~gif\|link~~=]]		<youtube width="500" height="300">
			https://www.youtube.com/watch?v=6ssUBh0dxVE&list=PL7MrU2icgiqG_kzDeXbQh76CJrA8C5coM&index=3
			</youtube>
			<br>Voir le tutoriel vidéo
	</p></div>		</p></div>

			The elevation symbol is used to see and work on 2D elements from the front. There are three ways to see an element from the front :

			1 - Selecting an object (clicking on the inner edge), then going to '''View \| Realistic or wireframe perspective'''

			2 - Selecting a wall (clicking on the inner edge), then going to '''View \| Wireframe or realistic elevation'''. By double clicking on walls, you will immediately be put into the realistic perspective.

			3 - Placing an elevation symbol, which will allow you to elevate an object or a group of objects, and then via '''View \| Wireframe or realistic view'''.

	~~<p class="encadrer">If you want them~~ to ~~stand out more~~, ~~then~~ you ~~can change the color of the technical symbol reminder lines~~		In order to place this elevation symbol, you must click on the '''Place''' button and then '''Elevation symbol''' in the ensuing drop down menu. It takes three clicks to place it: the two first to define the elevation area and the third one to determine the depth.
	~~To do so, select a technical symbol and right~~ click on ~~it,~~ the ~~click on attributes~~ and ~~modify the colour. To change all the technical~~ symbol ~~reminder lines, don~~'~~t forget to select "Paste style" on "All". This window also allows you to modify~~ the ~~placement height~~. ~~Once again, don't forget~~ to ~~select "Paste height" on "All" if you want~~ it to ~~be applied~~ to ~~all~~ the ~~symbols~~.~~</p>~~

	<div align="center">		<div align="center">
	<p class="cadreimg">		<p class="cadreimg">
	[[Image:~~Symbole2_FR~~.png\|link=]]		[[Image:SymboleEval1_FR.png\|link=]]
	</p></div>		</p></div>

			If you place an object in this view, it will be placed between the first two clicks in the depth.



	<!-- fin contenu -->		<!-- fin contenu -->
Line 50:		Line 72:
	</table>		</table>

	<span class="btnretour">[[#top\|Retour haut de page]]</span>  <span class="btnhome">[[~~Poser du texte, des flèches, des symboles~~\|Etape suivante]]</span>		<span class="btnretour">[[#top\|Retour haut de page]]</span>  <span class="btnhome">[[Sauvegarder et imprimer l'implantation\|Etape suivante]]</span>

Julien at 12:13, 19 April 2023

2023-04-19T12:13:12Z

← Older revision		Revision as of 14:13, 19 April 2023
Line 4:		Line 4:
	<td width="80%">		<td width="80%">
	<!-- contenu -->		<!-- contenu -->
	~~Pour fournir un dossier de pose complet~~, ~~que ce soit au poseur~~, au client,... ~~il faut que les arrivées d'eau~~, ~~les prises de courant~~, ~~les sorties de fil et autres contraintes techniques figurent à leur place sur les plans et les élévations~~.		To provide someone with a full placement folder, whether it's for the placer, the client, ... the water arrivals, the power outlets, the output wires and the other technical constraints must be in the correct places on the designs and the elevations.
	~~Ces objets particuliers se trouvent rassemblés dans le catalogue~~ '''@~~SYMBOLES TECHNIQUES~~'''.		These particular objects are can all be found in the '''@TECHNICAL SYMBOLS''' catalogue.

	~~Mettez-vous en vue d'élévation filaire pour poser une prise de courant qui sera matérialisée par son symbole technique~~. ~~Pour cela~~ :		Place yourself in the wireframe elevation perspective to place a power outlet that will be displayed via its technical symbol. To do this:

	1. ~~Choisissez le~~ catalogue ~~nommé~~ '''@~~SYMBOLES TECHNIQUES~~'''.		1. Choose the catalogue named '''@TECHNICAL SYMBOLS'''.

	2. ~~Choisissez le bloc nommé Prise~~ 10A ~~dans la zone de liste des blocs~~		2. Choose the block named Outlet 10A in the list of blocks area

	3. ~~Tapez la~~ distance ~~dans la zone de texte~~ "G" ~~pour indiquer la~~ distance ~~entre le~~ centre ~~de la prise de courant et l'arête gauche du mur~~.		3. Enter the distance in the "L" text box to specify the distance between the centre of the outlet and the left end of the wall.

	~~Si c'est la~~ distance ~~entre le symbole technique et l'arête droite du mur que vous connaissez~~, ~~c'est dans la zone de texte~~ "D" ~~qu'il faudra la renseigner~~.		If you know the distance between the technical symbol and the right end of the wall, you should fill in this information in the "R" text box.


	4. ~~Remarquez la valeur de~~ 400 ~~représentant l’altitude de pose par défaut de la prise de courant que vous pouvez modifier par la valeur souhaitée~~.		4. Note that the value of 400 represents the default outlet placement height and that you can change it for your preferred value.

	5. ~~Validez la pose en cliquant sur le bouton~~ "~~Poser~~" ~~ou en appuyant sur la touche ENTRÉE~~.		5. Confirm by clicking on the "Place" button or by pressing on ENTER.

	~~Vous pouvez aussi poser le symbole technique en~~ "~~glisser-lâcher~~" ~~si vous ne souhaitez pas le placer à un endroit bien précis~~.		If you are not trying to place it very precisely, then you can use the "drag and drop" technique to place your technical symbol.

	<div align="center">		<div align="center">
Line 30:		Line 30:


	<p class="encadrer">~~Vous avez la possibilité de modifier la couleur des lignes de rappel des symboles techniques si vous souhaitez qu'elles ressortent davantage.~~		<p class="encadrer">If you want them to stand out more, then you can change the color of the technical symbol reminder lines
	~~Pour cela~~, ~~sélectionnez un symbole technique et faites clic droit~~, ~~Attributs et venez modifier la couleur~~. ~~Pour changer la couleur des lignes de rappel de tous les symboles techniques~~, n'~~oubliez pas de sélectionner~~ "~~Coller~~ style" ~~sur~~ "~~Tous~~". ~~Cette fenêtre vous permet également de modifier l'altitude de pose~~. ~~Une fois de plus~~, n'~~oubliez pas de sélectionner~~ "~~Coller altitude~~" ~~sur~~ "~~Tous~~" ~~si tous les symboles sont concernés~~.</p>		To do so, select a technical symbol and right click on it, the click on attributes and modify the colour. To change all the technical symbol reminder lines, don't forget to select "Paste style" on "All". This window also allows you to modify the placement height. Once again, don't forget to select "Paste height" on "All" if you want it to be applied to all the symbols.</p>

	<div align="center">		<div align="center">

Julien at 15:11, 6 February 2023

2023-02-06T15:11:34Z

← Older revision		Revision as of 17:11, 6 February 2023
Line 1:		Line 1:
	SYMBOLES		<table width="100%">

			<tr>
			<td width="80%">
			<!-- contenu -->
			Pour fournir un dossier de pose complet, que ce soit au poseur, au client,... il faut que les arrivées d'eau, les prises de courant, les sorties de fil et autres contraintes techniques figurent à leur place sur les plans et les élévations.
			Ces objets particuliers se trouvent rassemblés dans le catalogue '''@SYMBOLES TECHNIQUES'''.

			Mettez-vous en vue d'élévation filaire pour poser une prise de courant qui sera matérialisée par son symbole technique. Pour cela :

			1. Choisissez le catalogue nommé '''@SYMBOLES TECHNIQUES'''.

			2. Choisissez le bloc nommé Prise 10A dans la zone de liste des blocs

			3. Tapez la distance dans la zone de texte "G" pour indiquer la distance entre le centre de la prise de courant et l'arête gauche du mur.

			Si c'est la distance entre le symbole technique et l'arête droite du mur que vous connaissez, c'est dans la zone de texte "D" qu'il faudra la renseigner.


			4. Remarquez la valeur de 400 représentant l’altitude de pose par défaut de la prise de courant que vous pouvez modifier par la valeur souhaitée.

			5. Validez la pose en cliquant sur le bouton "Poser" ou en appuyant sur la touche ENTRÉE.

			Vous pouvez aussi poser le symbole technique en "glisser-lâcher" si vous ne souhaitez pas le placer à un endroit bien précis.

			<div align="center">
			<p class="cadreimg">
			[[Image:Symbole1_FR.gif\|link=]]
			</p></div>


			<p class="encadrer">Vous avez la possibilité de modifier la couleur des lignes de rappel des symboles techniques si vous souhaitez qu'elles ressortent davantage.
			Pour cela, sélectionnez un symbole technique et faites clic droit, Attributs et venez modifier la couleur. Pour changer la couleur des lignes de rappel de tous les symboles techniques, n'oubliez pas de sélectionner "Coller style" sur "Tous". Cette fenêtre vous permet également de modifier l'altitude de pose. Une fois de plus, n'oubliez pas de sélectionner "Coller altitude" sur "Tous" si tous les symboles sont concernés.</p>

			<div align="center">
			<p class="cadreimg">
			[[Image:Symbole2_FR.png\|link=]]
			</p></div>

			<!-- fin contenu -->

			</td>

			<td valign="top" width="20%">

			{{:En_Concevoir}}

			</td>
			</tr>
			</table>

			<span class="btnretour">[[#top\|Retour haut de page]]</span>  <span class="btnhome">[[Poser du texte, des flèches, des symboles\|Etape suivante]]</span>